Fan Tech VHR704 Heat Recovery Ventilator

FEATURES

Super Compact Size
Top Port Design Fits in Tight Spaces
Includes Easy-Mount Wall Bracket
Aluminum Heat Recovery Core
4” (100mm) Duct Connections
No Balancing Required
Easy Access Service Door
3’ (914mm) Plug-in Power Cord
Automatic Exhaust Defrost Allows Units to Always Stay in Ventilation Mode
Only 26 lbs (12 kg)
Electrostatic Filters (washable)
Easy Core Guide Channels For Removing Core
Multiple Speed Operation

SPECIFICATIONS

CASE 24 gauge galvanized steel. Baked powder coated paint, grey. Cabinet fully insulated with 1" (25 mm) aluminum foilface high density polystyrene foam to prevent condensation and meet the requirements of the UL 94HF.

MOTORS Two (2) German-manufactured, factory-balanced ebm™ motors with backward curved blades. Motors come with permanently lubricated sealed ball bearings to guarantee long life and maintenance-free operation. Seven (7) year warranty. Steep fan curves requires no balancing of airflows.

CORE Aluminum heat recovery core configured for efficient cross-flow ventilation. Core is 8.5˝ x 8.5˝ (216 x 216 mm) with a 8˝ (205 mm) depth. Cores are manufactured by Fantech to withstand extreme temperature variations.

FILTERS Two (2) Washable Electrostatic Panel Type Air Filters, 8.5˝ (216mm) x 8˝ (203mm) x 0.125˝ (3mm).

CONTROLS Unit is designed to accommodate the whole series of Fantech HRV controls.

DEFROST A preset defrost sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

SERVICEABILITY Core, filters, motors and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 10˝ (250mm) of clearance is recommended for removal of core.

DUCT CONNECTION 4˝ (100mm) steel duct connections with rubber gasket for easy sealing.

DRAIN 1/2˝ (13mm) OD (outside diameter) drain spout provided, entire bottom of unit covered by pan.

WARRANTY Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Call for price!

(877) 604-0311